Step by Step Installation
I am tested on this configuration, it is working properly without any problem.
Config:
Gigabyte H81-M-S
I3 3.39 Ghz
HDD 500 gb
4 Gb ram 1600 mhz DDR3
Nvidea Gforce 210 2 GB graphics card
Bios Setup
1. To access BIOS/UEFI Setup, press and hold Delete or F2 on a USB Keyboard while the system is booting up.
2. Load Optimized Defaults by pressing the "F7" key.
3. Change "Boot Option #1" to your USB drive
4. Enable HPET (High Precision Event Timer) if possible and set back to 64-bit.
5. SATA Control Mode Change it to "AHCI". Mac OS X only works with AHCI.
6. Set USB drive to the highest boot priority.
7. Intel Turbo Boost Technology: Disabled
8. If your CPU supports VT-d, disable it.
9. If your system has CFG-Lock, disable it.
10 If your system has Secure Boot Mode, disable it.
11 If your system has OS Type, set it to Other OS.
12 If your system has Initial Display Output to IGFX, Set the instead of PCI.
13 Save and exit. Your machine should reboot.
I am tested on this configuration, it is working properly without any problem.
Config:
Gigabyte H81-M-S
I3 3.39 Ghz
HDD 500 gb
4 Gb ram 1600 mhz DDR3
Nvidea Gforce 210 2 GB graphics card
Bios Setup
1. To access BIOS/UEFI Setup, press and hold Delete or F2 on a USB Keyboard while the system is booting up.
2. Load Optimized Defaults by pressing the "F7" key.
3. Change "Boot Option #1" to your USB drive
4. Enable HPET (High Precision Event Timer) if possible and set back to 64-bit.
5. SATA Control Mode Change it to "AHCI". Mac OS X only works with AHCI.
6. Set USB drive to the highest boot priority.
7. Intel Turbo Boost Technology: Disabled
8. If your CPU supports VT-d, disable it.
9. If your system has CFG-Lock, disable it.
10 If your system has Secure Boot Mode, disable it.
11 If your system has OS Type, set it to Other OS.
12 If your system has Initial Display Output to IGFX, Set the instead of PCI.
13 Save and exit. Your machine should reboot.
0 comments:
Post a Comment